General information
B&R ID code | 0xF9B8 |
Status LED |
1x red/green; configurable, dimmable 2x red/green/blue; configurable, dimmable |
Buzzer | Yes |
Brightness sensor | Yes |
Certifications | |
UN ECE-R10 | Yes |
CE | Yes |
UKCA | Yes |
DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
Controller
Operating system | PPT50 system |
Processor | |
Type | ARM Cortex-A9, dual core |
Clock frequency | 800 MHz |
Flash | 512 MB |
DRAM | 1 GB |
Display
Type | TFT color |
Diagonal | 7.0" |
Colors | 16.7 million (RGB, 8 bits per channel) |
Resolution | WVGA, 800 x 480 pixels |
Contrast |
Rev. ≥ C3: Typ. 550:1 Rev. < C3: Typ. 600:1 |
Viewing angles | |
Horizontal | Direction L / Direction R = 70° |
Vertical |
Rev. ≥ C3: Direction U / Direction D = Typ. 50° Rev. < C3: Direction U / Direction D = Typ. 60° |
Backlight | |
Type | LED |
Brightness | Typ. 500 cd/m² |
Brightness (dimmable) | Yes |
Half-brightness time | 50,000 h |
Touch screen | |
Type | Multi-touch |
Technology | PCT (projected capacitive touch) |
Surface | Glass, chemically hardened (6H) |
Screen rotation | Yes |
Interfaces
Interface IF1 | |
Type | Ethernet |
Variant | M12, D-coded |
Transfer rate | 10/100 Mbit |
Interface IF3 | |
Type | USB 2.0 |
Variant | On multi-header |
Current-carrying capacity | Max. 0.5 A |
Digital inputs
Quantity | 8 |
Nominal voltage | 12 / 24 VDC |
Input voltage | 9 to 32 VDC |
Input circuit | Sink |
Input filter | |
Hardware | Approx. 20 ms |
Software | No |
Input current |
Typ. 1.3 mA (at 12 VDC) Typ. 2.5 mA (at 24 VDC) |
Input resistance | Typ. 9 kΩ |
Switching threshold | Typ. 50% of the supply voltage |
Digital outputs
Quantity | 4 |
Variant | Source (current-sourcing FET) |
Nominal voltage | 12 / 24 VDC |
Nominal output current | Max. 0.5 A permissible continuous current |
Output protection |
Shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
Diagnostic status | Status display via read-back measurement |
RDS(on) | Max. 100 mΩ |
Residual voltage | <0.1 V at 0.5 A nominal current |
Additional functions |
Overload shutdown / short-circuit shutdown: Yes (for each channel); must be acknowledged by user Hardware filter read-back measurement: Approx. 20 ms Software filter read-back measurement: No Short-term overcurrents during the switch-on procedure are tolerated. |
Electrical properties
Operating conditions
Mounting orientation | |
Any | Yes |
Degree of protection per EN 60529 | IP66 |
Ambient conditions
Mechanical properties
Front | |
Design | Black |
Dimensions | |
Width | 198 mm |
Height | 141 mm |
Depth | 53.15 mm |
Weight | 963 g |

Numero materiale:
6PMT50.0702-19BDescrizione:
Power Panel T50 mobile, 7.0", glass front, 1x Ethernet. CPU and memory: 800 MHz dual core (ARM Cortex-A9), 1 GB RAM, 512 MB onboard flash drive. Display and touch screen: 7.0", 800 x 480 (WVGA) resolution, projected capacitive touch screen, multi-touch support, glass front with black frame, landscape and portrait format configurable with software. Interfaces: 1x Ethernet 10/100 Mbit/s, 1x USB 2.0 on multi-header. Client software: Integrated service page, VNC client, embedded web browser.
accessori opzionali
Brackets
6PM.AC.PAN-070 | T50 mobile 7 inch, panel installation set |
6PM.AC.RAM-001 | RAM installation set 1 inch B-ball, diamond plate for panel, including screws, short connecting arm, round base plate, suitable for T50 mobile 5", 7" |
6PM.AC.RAM-002 | RAM installation set 1.5 inch, C-ball, diamond plate for panel, including screws, medium connecting arm, round base plate, suitable for T50 mobile 5", 7", 10.1" |
Miscellaneous
6PM.AC.CLP-100 | 100x retaining clips for Power Panel T-Series mobile |
Mounting tools
X67ACTQMX | Set di chiavi dinamometriche X67, per connettori X67 M8 e M12, per connettori a testa esagonale |
Other
6PMTBT50.01-00 | T50 mobile, connector for Superseal header, with connector contacts and dummy plugs |
POWERLINK/Ethernet
X67AC2E01 | X67 Connettore M12, 4 pin, codice D, schermato, connessione a perforazione di isolante |
POWERLINK/Ethernet-Cable
X67CA0E41.0010 | POWERLINK/Ethernet connection cable, RJ45 to M12, 1 m |
X67CA0E41.0020 | POWERLINK/Ethernet connection cable, RJ45 to M12, 2 m |
X67CA0E41.0030 | POWERLINK/Ethernet connection cable, RJ45 to M12, 3 m |
X67CA0E41.0050 | POWERLINK/Ethernet connection cable, RJ45 to M12, 5 m |
X67CA0E41.0150 | POWERLINK/Ethernet connection cable, RJ45 to M12, 15 m |
X67CA0E41.0500 | POWERLINK/Ethernet connection cable, RJ45 to M12, 50 m |
X67CA0E61.0010 | POWERLINK/Ethernet connection cable, M12 to M12, 1 m |
X67CA0E61.0020 | POWERLINK/Ethernet connection cable, M12 to M12, 2 m |
X67CA0E61.0050 | POWERLINK/Ethernet connection cable, M12 to M12, 5 m |
X67CA0E61.0100 | POWERLINK/Ethernet connection cable, M12 to M12, 10 m |
X67CA0E61.0150 | POWERLINK/Ethernet connection cable, M12 to M12, 15 m |
X67CA0E61.0200 | POWERLINK/Ethernet connection cable, M12 to M12, 20 m |
X67CA3E41.0150 | POWERLINK/Ethernet connection cable, RJ45 to M12, can be used in cable drag chains, 15 m |
Service access cap
X90AC-RP-SC-00 | Set di pezzi di ricambio per il tappo di accesso X90 1x guarnizione profilata in silicone, arancione 1x guarnizione profilata in silicone, gialla 1x tappo di accesso con funzione di espulsione |
wiring harness
6PMCAT50.02-00 | T50 mobile, wiring harness starter set for T50 mobile, 2 m length, for Superseal connection |
Aggiornamenti HW di Automation Studio | Versione (data) | Download |
---|---|---|
V4.7 HW Upgrade (6PMT50.0702-19B) | EXE / 5 MB | |
V6.0 HW Upgrade (6PMT50.0702-19B) | EXE / 5 MB |
Certificati | Versione (data) | Download |
---|---|---|
DNV Type Approval Certificate - Power Panel T50 mobile | PDF / 188 KB | |
UN ECE-R10 | PDF / 378 KB |
Documentazione | Versione (data) | Download |
---|---|---|
Power Panel T50 mobile user's manual | PDF / 7 MB |
E-CAD (Electro o EPLAN Template) | Versione (data) | Download |
---|---|---|
Makro-/Artikeldaten 4.0.2 (6PMT50.0702-19B) | EXE / 610 KB | |
Makro-/Artikeldaten 4.0.2 (6PMT50.0702-19B) | EXE / 613 KB |
Immagini Linux | Versione (data) | Download |
---|---|---|
V4.7 LX Upgrade PMT50 | EXE / 223 MB | |
V4.7 LX Upgrade PMT50 ZIP | ZIP / 223 MB | |
V6.0 LX Upgrade PMT50 | EXE / 223 MB | |
V6.0 LX Upgrade PMT50 ZIP | ZIP / 223 MB |
M-CAD (Mechan. Template) | Versione (data) | Download |
---|---|---|
3D files STP 6PMT50.0702-19B | ZIP / 6 MB |